panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ lk-p asctb199e 201202-t ordering information types notes: 1. standard packing carton: 100 pcs. case: 500 pcs. 2. 18 v dc types are also available. please consult us for details. rating 1. coil data 1a 10a tv-5 rated power relays lk-p relays contact arrangement nominal coil voltage part no. 1 form a 5v dc LKP1AF-5V 9v dc lkp1af-9v 12v dc lkp1af-12v 24v dc lkp1af-24v nominal coil voltage pick-up voltage (at 20 c 68 f ) drop-out voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) nominal operating power max. applied voltage (at 20 c 68 f ) 5v dc 70%v or less of nominal voltage (initial) 10%v or more of nominal voltage (initial) 106.4ma 47 ? 530mw 6.5v dc 9v dc 58.8ma 153 ? 11.7v dc 12v dc 44.2ma 272 ? 15.6v dc 24v dc 22.1ma 1,087 ? 31.2v dc vde rohs compliant features 1. high switching capacity: 10 a 277v ac 2. high insulation resistance between contact and coil 1) creepage distance and clearances between contact and coil: min. 6 mm .236 inch (in compliance with iec60065) 2) surge withstand voltage between contact and coil: 10,000 v 3. popular terminal pitch in av equipment ?ld 4. space-saving slim type base area: width 11 length 24 mm width .433 length .945 inch 5. conforms to the various safety standards ul, csa, vde, t?v and semko approved typical applications ?audio visual equipment tvs, vtrs ?of?e equipment lbp, crt ?home appliances refrigerator, air conditioner lk-p relay lkp 1a f protective construction f: flux-resistant type nominal coil voltage (dc) 5v, 9v, 12v, 24v contact arrangement 1a: 1 form a notes: certified by ul, csa, t?v and semko vde approved type is available. please consult us for details.
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ lk-p asctb199e 201202-t 2. speci?ations * speci?ations will vary with foreign standards certi?ation ratings. notes: *1. this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. wave is standard shock voltage of 1.2 50 s according to jec-212-1981 *3. the upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. refer to usage, transport and storage conditions in notes. reference data characteristics item speci?ations contact arrangement 1 form a contact resistance (initial) max. 100 m ? (by voltage drop 6 v dc 1a) contact material agsno 2 type rating nominal switching capacity (resistive load) 10a 277v ac, 5a 30v dc max. switching power (resistive load) 2,770va, 150w max. switching voltage 277v ac, 30v dc max. switching current 10a (ac), 5a (dc) min. switching capacity (reference value)* 1 100ma, 5v dc electrical characteristics insulation resistance (initial) min. 1,000m ? (at 500v dc) measurement at same location as ?reakdown voltage section. breakdown voltage (initial) between open contacts 1,000 vrms for 1 min. (detection current: 10 ma) between contact and coil 4,000 vrms for 1 min. (detection current: 10 ma) temperature rise (coil) max. 45 c 113 f (by resistive method, nominal coil voltage applied to the coil; contact carrying current: 10a, at 70 c 158 f ) surge breakdown voltage* 2 (between contact and coil) (initial) 10,000 v operate time (at nominal voltage) (at 20 c 68 f ) (initial) max. 15 ms (excluding contact bounce time.) release time (at nominal voltage) (at 20 c 68 f ) (initial) max. 5 ms (excluding contact bounce time) (without diode) mechanical characteristics shock resistance functional 200 m/s 2 (half-wave pulse of sine wave: 11 ms; detection time: 10 s.) destructive 1,000 m/s 2 (half-wave pulse of sine wave: 6 ms.) vibration resistance functional 10 to 55 hz at double amplitude of 1.5 mm (detection time: 10 s.) destructive 10 to 55 hz at double amplitude of 1.5 mm expected life mechanical (at 180 times/min.) min. 2 10 6 electrical min. 10 5 (on/off = 1.5s : 1.5s at rated load) conditions conditions for operation, transport and storage* 3 ambient temperature: ?0 c to +70 c ?0 f to +158 f , humidity: 5 to 85% r.h. (not freezing and condensing at low temperature), air pressure: 86 to 106kpa max. operating speed 20 times/min. (at nominal switching capacity) unit weight approx. 12 g .42 oz 1. max. switching power 2. coil temperature rise sample: lkp1af-12v, 6 pcs. point measured: coil inside contact current: 5 a, 10 a 3. ambient temperature characteristics and coil applied voltage contact current: 10 a 100 10 1 010 100 contact voltage, v contact current, a 1000 20 60 55 50 40 35 30 25 45 120 20 c 10a 20 c 5a 70 c 10a 70 c 5a temperature rise, c coil applied voltage, %v 20 220 180 140 100 60 010203 04050607080 ambient temperature, c allowable ambient temperatures against % coil voltages (max. inside the coil tem- perature set as 115 c pick-up voltage coil applied voltage, %v cold start 239 f )
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ lk-p asctb199e 201202-t dimensions (mm inch ) safety standards for cautions f or us e . ul/c-ul (recognized) csa (certi?d) vde (certi?d) tv rating (ul/csa) t?v (certi?d) semko (certi?d) file no. contact rating file no. contact rating file no. contact rating file no. rating file no. rating file no. contact rating e43149 10a 277v ac 5a 30v dc lr26550 etc. 10a 277v ac 5a 30v dc 40014390 10a 250v ac (cos =1.0) ul e43149 csa lr26550 tv-5 b 11 05 13461 299 10a 250v ac (cos =1.0) 5a 30v dc (0ms) 807779 3/100a 250v ac 5/40a 250v ac 10a 250v dc 4. life curve operation frequency: 20 times/min. (on/off = 1.5s: 1.5s) ambient temperature: room temperature 100 10 1 2 046810 250v ac resistive load contact current, a life, 10 4 5. electrical life test (10 a 277 v ac, resistive load) sample: lkp1af-12v, 6 pcs. operation frequency: 20 times/min. (on/off = 1.5s: 1.5s) ambient temperature: 20 c 68 f circuit: change of pick-up and drop-out voltage change of contact resistance 12v dc contact welding detection and mis- contacting detection circuit 277v ac 0 0 2 4 6 8 10 12 510 max. min. x max. min. x no. of operations, 10 4 pick-up and drop-out voltage, v pick-up voltage drop-out voltage 0 0 5 10 15 20 25 30 35 40 45 50 105 max. min. x no. of operations, 10 4 contact resistance, m ? the cad data of the products with a cad data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ external dimensions 4 0.5 1.65 max. 25.0 max. 11.0 0.3 0.5 dia. 20.0 16.5 0.4 max. 24.0 7.5 1.0 .157 .020 .065 .984 .433 .012 .020 dia. .787 .650 .016 .945 .295 .039 pc board pattern (bottom view) tolerance: 0.1 .004 schematic (bottom view) 2-0.9 dia. 2-1.3 dia. 16.5 7.5 20.0 2-.035 dia. 2-.051 dia. .650 .295 .787 cad data dimension: less than 1mm .039inch : min. 1mm .039inch less than 3mm .118 inch : min. 3mm .118 inch : gener al toler ance 0.1 .004 0.2 .008 0.3 .012
|
